388 – 8.0 Ton Backhoe Loader


Bucket Capacity: 1.0 m³ / 0.3 m³

Rated Load: 2,500 kg

Rated Power: 74 kW – 86 kW

Max. Dump Height: 2,831 mm

Max. Dig Depth: 4,149 mm / 5,510 mm (telescopic)

Operating Weight: 8,000 kg


Available in 2 configurations: Elite (variable hydraulics + pilot controls) · Basic (mechanical transmission + fixed hydraulics)

Standard on all: 2WD/4WD Switchable Drive · Danfoss Steering Gear · 14-17.5/19.5L-24 Tires · Air Conditioner · Backup Camera · Pre-heating · LED Lights · Caution Lights

The Shanmon 388 3 point backhoe loader is a cost-effective machine built for digging, loading, and material handling on construction sites. It comes in two configurations — Elite and Basic — to match different budgets and job requirements. For example, engine options include Yuchai, Weichai, and Cummins. Moreover, the 388 can be equipped with a wide range of attachments including …

Key Features
  • Multiple engine options: Yuchai, Weichai, and Cummins all fit the 388. In addition, China II, China III, and Euro V emissions are available across the range.
  • Switchable 2WD/4WD drive: Specifically, the operator can switch between two-wheel and four-wheel drive depending on ground conditions, improving traction on soft terrain and saving fuel on hard surfaces.
  • Advanced hydraulics (Elite): Meanwhile, the variable displacement system with 20 MPa pressure delivers greater digging force and precise control.
  • 2-wheel steering: This provides a simple and reliable steering system for standard construction sites. Furthermore, the ROPS/FOPS cab with air conditioning comes standard on every configuration.
Configurations
Feature388 Elite388 Basic
Engine
Yuchai (China II)StandardStandard
Weichai (China II)StandardStandard
Weichai (Euro V)OptionalOptional
Cummins (China II/III)OptionalOptional
Transmission & Drivetrain
TransmissionChinese electronic 4F/4RChinese mechanical 4F/4R
AxlesChinese dry brakeChinese dry brake
Drive2WD / 4WD switchable2WD / 4WD switchable
Tires14-17.5 / 19.5L-24 tubeless14-17.5 / 19.5L-24 tubeless
Hydraulic System
System typeVariable displacementFixed displacement
System pressure20 MPa20 MPa
Pump flow160 L/min126 L/min
Control typePilot joystickPilot joystick
PumpVariable pumpGear pump
ValveLoad-sensingStandard
Steering
Steering modes2-wheel steering2-wheel steering
Steering gearDanfossDanfoss
Cab & Safety
CabROPS/FOPSROPS/FOPS
CameraBackup cameraBackup camera
Otherpre-heating, LED lightspre-heating, LED lights
How the 388 Adapts to Different Markets

The configuration table above shows how the 388 serves different buyers. For example, the Elite version targets buyers who need pilot controls and variable hydraulics for precise operation. Meanwhile, the Basic model offers a cost-effective solution for markets where mechanical simplicity and lower price are preferred. In addition, both configurations share the same robust chassis, ROPS/FOPS cab, and Danfoss steering system. As a result, the 388 covers a wide range of customer needs with a single platform.

Videos
Send Inquiry

Options

Front End
4-in-1 bucket6-in-1 BucketFront-quick-couplergrass-grapplerSnow-blade
4 in 1 bucket6 in 1 bucketQuick couplerGrass grapplerSnow blade
pallet-forkDozer-bladeSnow SweeperMixing-bucketLog-grappler
Pallet ForkDozer bladeSnow sweeperMixing bucketLog grappler
Bucket bladeScreening bucket
Bucket bladeScreening bucket
Rear End
quick-couplerClamshell BucketHydraulic breakerHydraulic augerLog grappler
Quick couplerClamshell BucketHydraulic breakerHydraulic breakerLog grappler
rakeRipperV-ditch-bucketteeth-bucketteethless-bucket
RakeRipperV-ditch bucketTeeth bucketTeethless bucket
hydraulic-compactorHydraulic-sheartelescopic-boom
Hydraulic compactorHydraulic shearTelescopic boom
Others
Cummins-engineCummins-engineWeichai-engineShanmon-partsShanmon-parts
Cummins enginePerkins engineWeichai engineAutomatic lubricationParking heater
Air-conditionerelectric-tansmissionwet-brake-axlesShanmon-parts
Air conditionerElectric transimssionWet brake axlesRide control

Parameters

Shanmon-3cx-size-1

ATransport length6100mm
BWheel base2280mm
CDistance from arm pivot to rear axle1327mm
DGround clearance on bracket400mm
EGround clearance on arm carrier486mm
FSteering wheel center height2026mm
GCab top height2855mm
HOverall height3813mm
JFram width2280mm
KBucket width2268mm

Shanmon-3cx-size-2

MUnloading height2831mm
NLoad over height3360mm
OLoading hinge pin height3498mm
PPin extends forward370mm
QReach to ground (Main blade level)1580mm
RMax. reach at full height1233mm
SUnloading distance927mm
TDigging depth56mm
UTake-up angle46 Degrees
VUnloading angle43 Degrees
*Rated capacity1.0 Cbm

Shanmon-3cx-size-3

Standard DipperExtended Dipper
AMax. digging depth4149mm5510mm
BReach-Flush with the ground to center of rear wheel6630mm7854mm
CReach- ground to slewing center5304mm6258mm
DExtension- at full height to rotary center distance1902mm2303mm
ESide extension- to the centerline of the machine5831mm7055mm
FWorking height5346mm6517mm
GMax. loading height3813mm4720mm
HTotal travel of main column1054mm1054mm
JBackhoe Swing angle180 Degrees180 Degrees
滚动至顶部